Bitumen 50-70 Supplier and Exporter
Dubai bitumen penetration grade 50/70 is semi hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the below technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen 50/70 is one of the most used bitumen grades and it’s a basic material for all other bituminous products.
Softening point and penetration of bitumen 50-70
Penetration grade bitumen supplied by Dubai Bitumen Co. is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by Dubai Bitumen Co. is produced from the remains of crude oil after cracking and removing its hydrocarbon. Penetration grade bitumen 50-70 has a penetration between 50~70 desi-millimeter and a softening point between 46 ~ 54C. Penetration grade bitumen 50-70 has a thermoplastic property which is similar to synthetic resin which gets softer with heating and hardens when cooled. This grade of bitumen 50-70 has very strong viscosity compared to other grades and it’s widely used.
Guaranty/warranty of Bitumen 50-70 Supplier and Exporter
Dubai Bitumen Co. guaranties the quality of bitumen 50-70 by arranging international inspectors to check its quality and quantity of our bitumen during the stuffing of our containers. Dubai Bitumen Co. guaranties the quality if its bitumen to meet with ASTM/EN 12591.
Specification of penetration bitumen 50/70
|
Bitumen 50/70 | Specification | Test method |
|---|---|---|
| Penetration @ 25 c |
50/70 |
D.5 |
|
Softening point c |
46/54 | D.36 |
|
Ductility @25 c |
100 Min | D.113 |
|
Loss on heating(wt) % |
0.2 Max | D.6 |
|
Flash point c |
250 Min | D.92 |
| Solubility in CS2(wt) % | 99.05 Min | D.4 |
|
Drop in penetration after heating % |
20 Max | D.5 |
| Density @25 c | 1.01/1.06 | D.70 |
|
Spot test |
negative |
A.A.S.H.O.T102 |